FORM FOR ANNUAL SERVICE AND MAINTENENCE
Check point for annual service and maintenence:
Status/Value
Comment/remark
Visual check outside cabinet
LED indication lit
Check cables, connectors, connector pins
Check sockets
Check color, foil and instructions
Check external antenna (when installed)
Check fastening/fixing to ground/wall
Cean LS4 outside surface
Check locking mechanism
Check both RCCB by pressing “T” button. Check that LED
indication switches to red color for both sides
Function test by GARO test-equipment or similar
Check that electrical power is delivered by indications on test
equipment
Check RFID reader (when available). Indication by 2 or 3
flashes from LED:s
Check Type 2 socket locking function (Type 2 socket versions)
Turn off the electrical power
Check gaskets
Check torque for mains terminals
Check torque for LS4 fixing screws towards ground/wall
Check torque for connectors on contactors, relays,
energymeters and DC-PSU
Check connectors on CCU module
Measure the earthing resistans (Ohm) on EV sockets/cables
with a multimeter
Clean inside when necessary
Turn on the electrical power
Check charging function on both sides
Plant ID:
Name:
Date:
7
EN
