RCC Zone Offset
This clock is equipped with radio controlled time adjustment. The user will need to work
out the time zone signal they receive at their current location and make (any) adjustment
as required. This function also allows for daylight saving adjustment. Contact your local
weather bureaus or authorities for more information.
Press ‘- / RCC’ button (3) once for +1 time zone.
Press ‘- / RCC’ button (3) once again for +2 time zone.
Press ‘- / RCC’ button (3) once again for -1 time zone.
Press ‘- / RCC’ button (3) once again for same time zone.
To set time manually:
Hold down the “
MODE
” button (1) for approximately 3 seconds until the display is
flashing.
Press
‘
+ / °C / °F
’
button (2) or
‘
- / RCC
’
button (3) to change the hour setting.
Press ‘MODE’ button (1) again. Press
‘
+ / °C / °F
’
button (2) or ’- / RCC’ button (3) to
change the minute setting.
Press ‘MODE’ button (1) again. Press
‘
+ / °C / °F
’
button (2) or
‘
- / RCC
’
button (3)
to toggle between am / pm and 24-hour clock
Press ‘MODE’ button (1) again to confirm settings. Display will no longer flash.
To see alarm time:
Press “
MODE
” button (1) once and alarm time 1 will be shown as indicated by
.
Press “
MODE
” button (1) again and the current time will be shown.
To set alarm time:
Press “
MODE
” button (1) once and alarm time 1 will be shown as indicated by
.
Press and hold ‘MODE’ button (1) for approximately 3 seconds until the digits flash.
Press
‘
+ / °C / °F
’
button (2) or
‘
- / RCC
’
button (3) to change the hour setting.
Press ‘MODE’ button (1) again.
Press
‘
+ / °C / °F
’
button (2) or
‘
- / RCC
’
button (3) to change the minute setting.
Press ‘MODE’ button (1) again.
When alarm time is shown, press ‘MODE’ button (1) to turn on and off the alarm.
will
be shown when the alarm is on.
When alarm time is shown, press
‘
+ / °C / °F
’
button (2) or
‘
- / RCC
’
button (3) to
turn on and off the alarm.
will be shown when the alarm is on.
The alarm will sound for 120 seconds when the preset alarm time is reached. Hit any
button on the back of the clock to deactivate the alarm. The clock will automatically enter
snooze mode if the alarm is not deactivated.
Hit the “SNOOZE / LIGHT” button (4) when the alarm is on to enter snooze mode.
will flash when the clock is it snooze mode. The alarm will sound again in 5
minutes. Hit any button on the back of the clock to deactivate the alarm.
