7
Enabling the alarm clock
In the basic display mode, press and hold the
ALARM
button. One press enables the alarm clock, two
presses disable it. The display indicates the enabled alarm clock with the icon
Turning off alarm signal, Snooze
As soon as the alarm signal goes off at the preset time, you can activate the Snooze function by pressing
SNOOZE / LIGHT
. The icon
will flash one the display. The alarm signal will be reactivated
after 5 minutes.
If you do not want the Snooze function, press the
ALARM
button to disable the alarm signal.
If no button is pressed, the alarm signal will be turned off automatically after 2 minutes.
SETTING OF ALARM FOR THE UPPER AND LOWER TEMPERATURE LIMIT
The weather station allows setting the alarm of the upper and lower limits of indoor and outdoor
temperature. In the basic display mode, press and hold the
ALERT
button.
1 x press
displays the upper limit (HIGH) of the indoor temperature (INDOOR TEMPERATURE)
2 x press
displays the lower limit (LOW) of the indoor temperature (INDOOR TEMPERATURE)
3 x press
displays the upper limit (HIGH) of the outdoor temperature (OUTDOOR TEMPERATURE)
4 x press
displays the lower limit (LOW) of the outdoor temperature (OUTDOOR TEMPERATURE)
5 x press
basic display mode
Choose which value to set and press and hold the
ALERT
button for 3 seconds. A beep will sound and the
temperature will flash. Use the
- / MEM
and
+ / CH
buttons to set the required temperature.
The temperature alarm is enabled (or disabled) by pressing the
ALARM
button. The activation of the alarm
is indicated on the display by the icon
.
The upper limit alarm for the indoor temperature can be set from -
9° C to + 60° C, the lower limit from -10°
C to + 59° C
The upper limit alarm for the outdoor temperature can be set from -
9° C to + 70° C, the lower limit from -40°
C to +
59° C
Activating the alarm for the upper and lower temperature limit
Exceeding the set temperature limit will be indicated by an acoustic signal at regular intervals, the
corresponding
HIGH
or
LOW
icon will flash on the display.
To disable the alarm perform the same procedure as for its setting, deactivate the alarm by pressing
ALARM
, the icon
will not be displayed.
Note: if multiple wireless sensors are used, the upper and lower temperature limit alarm can be se for
each sensor separately. Select the sensor with the + / CH button
WEATHER FORECAST
The forecast is based on the change in barometric pressure, generally speaking when the barometric
pressure rises, the weather improves and vice versa. The weather forecast is valid for the next 12 to 24
hours within 30 to 50 km with the probability of 70 to 75%.
The weather forecast is displayed using 5 icons
clear somewhat cloudy cloudy precipitation stormy
After switching on the station, it is necessary to wait for at least 24 hours to display the correct
weather forecast. To speed up the process, the default weather forecast icon can be set according
to the current situation.
