4
COMMISSIONING
Main unit
1) The main unit can be powered by batteries (short-time display backlight for 7 seconds)
or by an AC adapter (permanent display backlight possible).
2) Remove the battery compartment cover on the rear side of the main unit and insert 3 pcs of AAA
batteries (micro). Observe the correct battery polarity. The display lights up and all display segments
are briefly displayed.
3) Close the battery compartment
The main unit can also be powered by the AC adapter even with the batteries inserted.
Connect the power cable connector to the socket on the bottom of the main unit, plug the USB end
of the power cable into the AC adapter, and insert the power adapter plug into a mains socket.
Note: observe the correct battery polarity to prevent damage to the weather station. Use only high quality
alkaline batteries for the main unit
SETUP OF THE WEATHER STATION
To enter the settings mode press and hold the
SET
button in the main screen mode for
3 seconds. For settings, use
- / MEM
and
+ / CH
buttons. To save, press the
SET
button once.
1) Press the SET button and hold for 3 seconds. A beep will sound and 24Hr will flash. Use the
- / MEM
or
+ / CH
button to select 24 Hr or 12 Hr time display format and confirm by pressing
SET
2) Timezone will flash. Use the
- / MEM
and
+ / CH
buttons to set the timezone. E.g., for the Czech and
Slovak Republic leave 01. Press SET to confirm
3) Hour will flash. Use the
- / MEM
and
+ / CH
buttons to set the current hour and confirm with
SET
4) Minutes will flash. Use the
- / MEM
and
+ / CH
buttons to set the current minute and confirm with
SET
5) Seconds will flash. Use the
- / MEM
and
+ / CH
buttons to set the current second and confirm with
the
SET
button
6) Year will flash. Use the
- / MEM
and
+ / CH
buttons to set the current year and confirm with
SET
7) Month will flash. Use the
- / MEM
and
+ / CH
buttons to set the current month and confirm with
SET
8) Day will flash. Use the
- / MEM
and
+ / CH
buttons to set the current day and confirm with
SET
9) The day name shortcut will flash. Use the
- / MEM
and
+ / CH
buttons to set the required language
(CZ
– Czech, EN - English, DE - German, IT - Italian, ES – Spanish) and confirm with
SET
10) Date will flash. Use the
- / MEM
and
+ / CH
buttons to set the data display format day-month,
or month-day and confirm with
SET
11) ON (or OF) will flash. Use the
- / MEM
and
+ / CH
buttons to turn the automatic reception of the DCF-77
signal on (ON, the icon shows), or off (OF, no icon) and confirm with
SET
12) ON (or OF) will flash together with DST (daylight savings time). Use the
- / MEM
and
+ / CH
buttons to
set the daylight savings time on (ON), or off (OF) and confirm with
SET
13) °C (or °F) will flash. Use the
- / MEM
and
+ / CH
buttons to display the temperature in °C or °F
and confirm with
SET
14) hPa (or inHg) will flash. Use the
- / MEM
and
+ / CH
buttons to display the barometric pressure in hPa
or inHg and confirm with
SET
15) The barometric pressure will flash. Press the
SNOOZE / LIGHT
button and press for 3 seconds to se
the barometric pressure to the absolute value. Use the
- / MEM
and
+ / CH
buttons to set the relative
value which you can determine for the given area for example on the Internet or a nearby airport.
Confirm the setting with
SET
. A beep will sound and the setting is complete.
16) The weather forecast icon will flash. Use the
- / MEM
and
+ / CH
buttons to set the icon according to the
current weather to accelerate the display of the weather forecast and confirm with
SET
Note: hold the - / MEM
or
+ / CH button when setting the value to increase or decrease this value faster.
If no button is pressed for 15 seconds, the last set value is saved and the setting mode exits.
