IRONCLAD TS-1 Operator Manual
7 of 12
Operator Manual
IRONCLAD
Step 5: Data Entry Screen
• Set up Camera before starting to ensure clear image of
the hard drive.
* Open
TS-1
drawer.
* Place hard drive in media drawer with serial number
label facing up (do not close drawer).
* Press
MENU
icon, select “Adjust Camera”.
Step 6: Adjust Camera View
• You will see the camera view on the
IRONCLAD
screen.
• Use the knob on the camera to adjust the focus.
• Remove hard drive from drawer in order to begin the
next step.
Step 7: Data Entry Screen
• Tap the Serial Number data entry box.
• Enter the first hard drive serial number using the
handheld bar-code scanner or manually entering the
numbers into the text field.
• Press
NEXT
button
Note: Some hard drives have multiple bar codes. Look for the
bar code preceded by “S/N” or “Serial Number.” Most hard drives
also have a scannable bar code along the bottom edge of the
drive.
Step 8: Data Entry Screen
• A dialog box will appear on the
IRONCLAD
screen
telling you “Please insert Hard Drive into drawer, close
drawer, and press ERASE button.”
• Press OK
NOTE: Place the hard drive in the drawer with the
serial
number facing up.
Degaussing with the IRONCLAD Erasure Verification
System and TS-1 Degausser Continued...
