IRONCLAD TS-1 Operator Manual
1 of 12
Operator Manual
IRONCLAD
Table of Contents
page
Ports & Connecting IRONCLAD
2
Overview of Screens
3-4
Connecting to TS-1
5
Degaussing with IRONCLAD and TS-1
6-9
Viewing IRONCLAD database
10-11
Logging out & Shutting down IRONCLAD
12
Troubleshooting
12
Bar-Code Scanner:
The handheld scanner allows you to scan hard drive serial
numbers to auto populate the “Serial Number” field. In facilities
that use bar code ID badges, the scanner also enables users to
log in by scanning their ID badges.
Touch Screen:
An onscreen keyboard appears on all screens that
require you to enter data. You can also connect a
keyboard and mouse via USB port to the IRONCLAD
system.
To enter information into the system, the IRONCLAD is equipped
with two inputs:
Image Capture System
Please read through entire manual before beginning.
Use operator manual after administrator
setup has been implemented.
Overview
The IRONCLAD Erasure Verification System is used with the
Garner TS-1 hard drive degausser to collect information about
the degauss cycle from the TS-1 including a photographic image
of the degaussed hard drive. IRONCLAD pairs the image with
the hard drive serial number, degaussing cycle data, operator ID,
and stores the combined information into a database.
The IRONCLAD comes equipped with four USB ports, which
allow the user to download the CSV database onto a thumb
drive. The exported database can be viewed in any spreadsheet
program or through a text editor.
Use the included stylus for ease of use.
