![background image](http://html1.mh-extra.com/html/garmin/vivofit-3/vivofit-3_quick-start-manual_3658028003.webp)
• Replaceable coin cell batteries may contain perchlorate
material. Special handling may apply. See www.dtsc.ca.gov
/hazardouswaste/perchlorate.
• Do not use a power and/or data cable that is not approved or
supplied by Garmin.
• If using an external battery charger, only use the Garmin
accessory approved for your product.
• Only replace batteries with correct replacement batteries.
Using other batteries presents a risk of fire or explosion. To
purchase replacement batteries, see your Garmin dealer or
the Garmin website.
• Do not operate the device outside of the temperature ranges
specified in the printed manual in the product packaging.
• When storing the device for an extended time period, store
within the temperature ranges specified in the printed
manual in the product packaging.
• Do not remove or attempt to remove the non-user-
replaceable battery.
• Contact your local waste disposal department to dispose of
the device/batteries in accordance with applicable local laws
and regulations.
Product Environmental Programs
Information about the Garmin product recycling program and
WEEE, RoHS, REACH, and other compliance programs can be
found at www.garmin.com/aboutGarmin/environment.
Declaration of Conformity
Hereby, Garmin declares that this product is in compliance with
the essential requirements and other relevant provisions of
Directive 1999/5/EC. To view the full Declaration of Conformity,
go to www.garmin.com/compliance.
Industry Canada Compliance
Category I radiocommunication devices comply with Industry
Canada Standard RSS-210. Category II radiocommunication
devices comply with Industry Canada Standard RSS-Gen. This
device complies with Industry Canada license-exempt RSS
standard(s). Operation is subject to the following two
conditions: (1) this device may not cause interference, and (2)
this device must accept any interference, including interference
that may cause undesired operation of the device.
Radio Frequency Radiation Exposure
This device is a mobile transmitter and receiver that uses an
internal antenna to send and receive low levels of radio
frequency (RF) energy for data communications. The device
emits RF energy below the published limits when operating in
its maximum output power mode and when used with Garmin
authorized accessories. To comply with RF exposure
compliance requirements, the device should be used as
described in the manual. The device should not be used in
other configurations. This device must not be co-located or
operated in conjunction with any other transmitter or antenna.
3