manualshive.com logo in svg

Garmin TREAD OVERLAND EDITION, Owner'S Manual, Page: 8 / 76

Share
Download
Garmin TREAD OVERLAND EDITION Owner'S Manual Download Page 8

Mounting and Powering the Device in Your Vehicle

 WARNING

This product contains a lithium-ion battery. To prevent the possibility of personal injury or product damage 
caused by battery exposure to extreme heat, store the device out of direct sunlight.
Both the device and its mount contain magnets. Under certain circumstances, magnets may cause interference 
with some internal medical devices and electronic devices, including pacemakers, insulin pumps or hard drives 
in laptop computers. Keep the device away from medical devices and electronic devices.

Before you use your device on battery power, you should charge it.
1 Open the lever  , press the suction cup to the windscreen and flip the lever back towards the windscreen.

The lever must be oriented towards the top of the windscreen.

2 Tighten the knob   slightly.
3 If necessary, adjust the mount for better viewing and operation.
4 Tighten the knob to secure the mount.
5 Connect the vehicle power cable   to the cable   on the mount.

6 Tighten the collar around the connected power cables.

2

Getting started

Summary of Contents for TREAD OVERLAND EDITION













































































Reviews:

No comments