10 Insert the axle, and hand tighten.
11 Tighten the axle to the torque specification indicated on the axle or in your bike instructions.
Attaching Your Quick Release Axle Bike
1 Select an option:
• If you have a 130 mm quick release axle, go to step 2.
• If you have a 135 mm quick release axle, go to step 5.
2 Open the installation kit
, and select the NDS/130 QR end cap support and the blue tool.
3 Use the blue tool to remove the existing end cap support on the non-drive side.
4 Use the blue tool to install the NDS/130 QR end cap support.
5 Open the installation kit
, and select the QR end caps.
Tacx NEO 3M Assembly Instructions
5
