10
Advanced Operation
Com Mode
Remote Flight Service Station (RFS), Unicom (UNI), and Mandatory Frequency (MF).
1. While in Com mode, press
ENT
. The right side of the display will show “
store as
” with a flashing
cursor at the first character of the name.
119.10 s124.55 store as _
2. Turn the
SMALL
knob to choose the desired character.
3. Turn the
LARGE
knob to move to the next character position.
4. After you turn the
LARGE
knob one position clockwise past the fourth character, three underscores at
the end of the line will flash.
5. Turn the
SMALL
knob to choose the desired type.
6. Press
ENT
after making your selections. Press
SEL
if you do not want to save the frequency.
Removing a Com Channel
You may only remove channels stored in the User list.
1. In Com mode, press
SEL
.
2. Turn the
LARGE
knob to the User list and then turn the
SMALL
knob to the desired channel.
3. Press
SEL
. “
Remove?
” will flash on the right side of the display.
119.10 s124.55 SLE ats Remove?
4. Press
ENT
to remove the channel from the User list or press
SEL
to exit without making changes.
Changing or Replacing a Saved Com Channel
Channels you have saved in the User list may be changed or updated by replacing the
frequency, but keeping the same name and type.
1. Note the name of the channel you want to change. You are going to use the same name and type for a
new channel.
2. Turn the
LARGE
and
SMALL
knobs to display the desired Standby frequency.