Appendix
108
nüvifone 01000846 Owner’s Manual
DRAFT
3. Ensure that the silver tip is located
in the end piece. Using a coin,
replace the end piece.
Mounting on Your
Dashboard
Notice
The
permanent
mounting adhesive is
extremely difficult to remove after it is
installed.
A mounting disk is included in some
nüvifone packages. Use the mounting
disk to mount your device to the
dashboard and comply with certain
state and local regulations.
1. Clean and dry the dashboard where
you are placing the disk.
2. Remove the backing from the
adhesive on the bottom of the disk.
3. Place the disk on the dashboard.
4. Remove the clear plastic cover
from the top of the disk.
5. Place the suction cup mount on top
of the disk. Flip the lever down
(toward the disk).
Removing the nüvifone,
Cradle, and Mount
Removing the nüvifone from
the Cradle
1. Press up on the tab on the top of the
cradle.
2. Tilt the nüvifone forward.
Removing the Cradle from the
Mount
1. Turn the cradle to the right or left.
2. Apply pressure until the socket on
the cradle releases the ball on the
mount.
Removing the Suction Cup
Mount from the Windshield
1. Flip the lever on the suction cup
mount toward you.