nüvi
®
57LM / 67LM Quick Start Manual
47
Mounting on Your Dashboard
NOTICE
The permanent mounting adhesive is extremely
difficult to remove after it is installed.
You can use an optional mounting disk to mount
your device to the dashboard and comply with
local regulations. See www.garmin.com.sg for
more information.
1
Clean and dry the dashboard where you are
placing the disk.
2
Remove the backing from the adhesive on
the bottom of the disk.
3
Place the disk on the dashboard.
4
Remove the clear plastic cover from the top
of the disk.
5
Place the suction cup mount on top of the
disk.
6
Flip the lever down (toward the disk).
Removing the Device, Mount, and
Suction Cup
Removing the Device from the Mount
1
Press the release tab or button on the
mount.
2
Tilt the device forward.
Removing the Mount from the Suction
Cup
1
Turn the device mount to the right or left.
2
Apply pressure until the socket on the mount
releases the ball on the suction cup.
Removing the Suction Cup from the
Windshield
1
Flip the lever on the suction cup toward you.
2
Pull the tab on the suction cup toward you.
