0
nüvi 200 and 200W series owner’s manual
Appendix
Mounting on Your
Dashboard
Use the enclosed mounting disk to
mount your unit to the dashboard and
comply with certain state regulations.
CaUTiOn:
The
permanent
mounting adhesive is
extremely difficult to remove
after it is installed.
1. Clean and dry the dashboard
where you are placing the
disk.
2. Remove the backing from the
adhesive on the bottom of the
disk.
3. Place the disk on the
dashboard.
4. Remove the clear plastic
cover from the top of the disk.
5. Place the suction cup mount
on top of the disk. Flip the
lever down (toward the disk).
Additional Maps
You can purchase additional
MapSource map data from Garmin
and load the maps in your nüvi
internal memory or on an optional
memory card.
To determine the versions of the
maps that are loaded on your nüvi,
open the Menu page. Touch
Tools
>
Settings
>
Map
>
Map info
. Check
http://my.garmin.com/maps/updates
to see if an update for your
map software is available. To enable
additional maps, you need your unit
) and serial number
(located near the power connector).
To load maps or waypoints in your
nüvi memory or on your memory
card, select the name for your nüvi
