nüvi 610/660/670 Owner’s Manual
b
asic
o
PeraTion
b
asic
o
PeraTion
Turning the nüvi On or Off
Press and hold the
Power
button on the top of the nüvi.
Charging the nüvi
To charge the nüvi, use one of the following methods:
● Connect the nüvi to the suction mount and the
12-Volt car adapter.
● Connect the USB cable to the nüvi and your computer.
● Connect the AC adapter to the nüvi and wall outlet (nüvi 660 and nüvi 670).
Acquiring Satellites
Before the nüvi can find your current location and navigate a
route, you must do the following:
1. Go outdoors to an open area, away from tall buildings
and trees.
2. Flip up the GPS antenna on the back of the nüvi, so
that it is parallel to the ground.
3. Turn on the nüvi. Acquiring satellite signals can take a
few minutes.
The
bars indicate satellite signal strength. When the bars are green, the nüvi has
acquired satellite signals; now you can select a destination and navigate to it. To use
the nüvi indoors, close the GPS antenna.
GPS Antenna Up
(Parallel to the Ground)
