Assembling the Garmin Ice Fishing Pole Mount
You need a Phillips screwdriver to assemble the Garmin Ice Fishing Pole Mount.
NOTICE
Keep the transducer cable secure during installation. Damage to the transducer cable wire or the cable jacket
can cause transducer failure.
1 Insert the Phillips head sheet metal screws included with
the pole mount into the four corners of the pole mount
base .
The screws protrude from the bottom of the base to
stabilize it on the ice.
2 Locate the pole handle and the top pole segment.
3 Place the base between the pole handle and the top
pole segment , and screw them together.
4 Determine how many of the three middle pole segments
you need to use, based on the thickness of the ice.
TIP: The top of the transducer must be below the bottom
of the ice for best performance.
5 Screw together the needed segments, with the shortest
segment on the bottom of the pole.
4