background image

© Copyright 2008 Garmin Ltd. or its subsidiaries

Garmin International, Inc.

 

1200 E 151st Street, Olathe, Kansas 66062 USA

 

Tel. 913/397.8200 

 

Fax. 913/397.8282

Garmin (Europe) Ltd

 

Liberty House, Hounsdown Business Park, Southampton, Hampshire, SO40 9RB UK

Tel. 44/0870.8501241 (outside the UK.) or 0808 2380000 (UK only)

 

Fax. 44/0870.8501251

Garmin Corporation 

 

No.  68, Jangshu 2nd Road, Shijr, Taipei County, Taiwan

 

Tel. 886/2.2642.9199

 

Fax. 886/2.2642.9099

Part Number 190-00889-01 Rev. B

© 2008 Garmin Ltd. or its subsidiaries

All rights reserved. Except as expressly provided herein, no part of this manual may be reproduced, copied, 

transmitted, disseminated, downloaded or stored in any storage medium, for any purpose without the express prior 

written consent of Garmin. Garmin hereby grants permission to download a single copy of this manual onto a hard 

drive or other electronic storage medium to be viewed and to print one copy of this manual or of any revision hereto, 

provided that such electronic or printed copy of this manual must contain the complete text of this copyright notice 

and provided further that any unauthorized commercial distribution of this manual or any revision hereto is strictly 

prohibited.

Information in this document is subject to change without notice. Garmin reserves the right to change or improve its 

products and to make changes in the content without obligation to notify any person or organization of such changes 

or improvements. Visit the Garmin Web site (

www.garmin.com

) for current updates and supplemental information 

concerning the use and operation of this and other Garmin products.
Garmin

®

 is a trademark of Garmin Ltd. or its subsidiaries, registered in the USA and other countries.

 

Intelliducer

 

is 

a trademark of Garmin Ltd. or its subsidiaries. These trademarks may not be used without the express permission of 

Garmin.

Summary of Contents for Intelliducer Transom Mount Sensor with Depth & Temperature (NMEA 0183









Reviews: