6-10
GTN 725/750 Pilot’s Guide
190-01007-03 Rev. Q
Foreword
Getting
Started
Audio &
Xpdr Ctrl
Com/Nav
FPL
Direct-To
Proc
Charts
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Services/
Music
Utilities
System
Messages
Symbols
Appendix
Index
6.4
Selecting an Approach
NOTE:
In software v6.21 and later, the pilot may load an alternate approach
during a missed approach procedure. The GTN retains all missed approaches
in the flight plan.
Only one approach can be loaded at a time in a flight plan. If an approach
is loaded when another approach is already in the active flight plan, the new
approach replaces the previous approach. The route is defined by selection of an
approach, the transition waypoint, and a runway.
1. Touch the
PROC
key on the Home page. The Approach, Arrival,
and Departure fields will be dashed until a selection is made.
Touch To View
Available Departures
Touch To View
Available Arrivals
Touch To View
Available Approaches
Figure 6-12 Procedures Selection Window
2. Touch the
Approach
key on the Procedures page to select
an approach for the destination airport. Confirm that the
intended airport is shown or touch the
Airport
key and select
the desired airport.
NOTE:
If using Descent VNAV, verify that the altitudes for the selected
procedure match the charted or ATC cleared altitudes and are appropriate
for the airframe type.
