8-20
GTN 725/750 Pilot’s Guide
190-01007-03 Rev. Q
Foreword
Getting
Started
Audio &
Xpdr Ctrl
Com/Nav
FPL
Direct-To
Proc
Charts
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Services/
Music
Utilities
System
Messages
Symbols
Appendix
Index
4. If desired, touch the
Airport
key to make the user waypoint
a user airport.
5. Touch the
Comment
key to add a short comment for the new
waypoint.
6. Touch the
Position Type
key and then
Lat/Lon
,
Radial/Radial
, or
Radial/Distance
to assign the type. See
the following instructions for more detail.
Touch to Select the
Desired Waypoint
Position Type
Figure 8-25 Waypoint Info - Create User Position Type
7. If desired, touch the
Temporary?
key to create the waypoint
for only temporary use. Temporary waypoints will be removed
when the power is cycled.
8. For user airports, touch the
Elevation
key and specify airport
elevation.
9. When finished with all selections, touch the
Create
key to
create the new waypoint.
8.8.1
Mark On Target
NOTE
: This feature is available in software v4.00 and later.
If an external Mark On Target (MOT) switch is installed, pressing that switch
will result in the creation of a User waypoint called MOTxxx at the point in space
where the MOT switch was pushed. The waypoints are created in increasing
numeric order up to number 999, at which point they will start replacing
existing waypoints at the beginning of the list.
When a Mark on Target waypoint is created, it may not be immediately
visible on the moving map page because the ownship icon will be directly on
top of the waypoint. Creation of the waypoint can be verified by changing zoom
scales on the map or viewing the User Waypoints page.
