manualshive.com logo in svg

Garmin GTN 725, Maintenance Manual, Page: 7 / 54

Share
Download
Garmin GTN 725 Maintenance Manual Download Page 7

190-01007-01

GTN 725/750 Maintenance Manual

Rev. 5

Page vi

GTN 725/750 SERVICE BULLETIN HISTORY

The following table identifies service bulletins for the GTN 725/750. The table is current at the time of 
publication of this manual (refer to date on front cover) and is subject to change without notice. Authorized 
Garmin Sales and Service Centers are encouraged to access the most up-to-date bulletin and advisory 
information on the Garmin Dealer Resource Page at 

www.garmin.com

 using their Garmin-provided user 

name and password.

Service Bulletin 

Number

Service Bulletin

Date

Purpose of Bulletin

1887

12/2018

GTN 6XX/7XX Notification of Mod Level 7

1879

10/26/2018

TSO GTN 6XX/7XX Software Upgrade to Main 
Software Version 6.51

1828

09/29/2018

GTN 6XX/7XX TSO Software Upgrade to Main 
Software v6.50 and COM Software v2.30

1722

01/26/2018

GTN 6XX/7XX Software Upgrade to Main Software 
Version 6.41 and NAV Software Version 6.03

1655

09/19/2016

GTN 6XX/7XX TSO Software Upgrade to Main 
Software v6.21 and GMA 35 Version 4.20A/4.21C

1625

06/19/2016

U.S. Forest Service (USFS) and U.S. Department of the 
Interior (DOI) Mod Level 6

1581

09/21/2016

GMA 35 Boot Block Software

1580

03/01/2016

GTN 6XX/7XX Software Upgrade to Main Software 
Version 6.11 and GMA 35 Audio Software Version 
4.10A/4.11C

1559

11/11/2015

GTN 650 750 Notification of Mod Level 5

1526

04/01/2015

GTN 635/650/750 Software Upgrade to COM Software 
Version 2.20

1466

01/14/2015

GTN 6XX/7XX Software Upgrade to Main software 
Version 5.13 and GMA 35 Audio Software Version 3.10

1406

02/27/2014

GTN 6XX/7XX Software Upgrade to COM Software 
Version 2.13

1404

04/03/2014

GTN 650/GTN 750 Notification of Mod Level 4

1369

10/30/2013

GTN 6XX/7XX Software Upgrade Main v4.00, COM 
v2.12, GMA 35 Audio v3.05, and Auxiliary Grammar 
2.20

1365

12/03/2013

GTN 6XX/7XX Series Unit Installations and ARINC 429 
Configuration Settings

1360

10/22/2013

GTN 6XX/7XX Software Upgrade to Main Software 
v5.00, COM Software v2.12, and GMA 35 Software 
v3.07

1356

10/02/2013

GTN 6XX/7XX Software Upgrade to COM Software 
Version 2.12 and GMA 35 ARC Database Version 3.08

Summary of Contents for GTN 725























































Reviews:

No comments