Garmin GTN 725, Installation Manual

Page: 83 / 178

GTN 725/750 TSO Installation Manual Page 5-7
190-01007-02 Rev. A
CHANNEL OUTPUT SELECTIONS
Selection Description
Off
No unit(s) connected to output of this channel.
ADS-B
Serial communication to Garmin GTX 33/330 ES or 33D/330D ES
Transponders.
Aviation Output
Serial position, altitude, velocity, and navigation data to the following units:
Argus 3000, 5000, or 7000 Moving Map
Electronics International FP-5L Fuel Flow Computer (non-TSO’d)
Garmin MX20 (V5.6 or later), GMX 200 [1]
Garmin GPSMAP 195, GPSMAP 295 or GPS III Pilot
Garmin GPSMAP 196, GPSMAP 296, and GPSMAP 396
Garmin GTX 327 Transponder
JP Instruments EDM-700 or EDM-760 Engine Monitor
Shadin 91204XM Digital Fuel Management System
Shadin 91053XM Digital Fuel Management System
Shadin 9628XX-X Fuel/Air Data Computer
Stormscope Series II (with NAVAID) Moving Map
Aviation (no Altitude)
Serial position, velocity, and navigation data to the following units:
Garmin MX20 (V5.5 or earlier)
Horizon DDMP
INSIGHT TAS 1000 Air Data Computer
Honeywell EGPWS Serial communication to a Bendix/King (Honeywell) KGP 560 EGPWS.
GMA 35 Control of GMA 35 Audio Panel functions.
GTX 32 # 1
Control of GTX 32 transponder functions, pressure altitude data, and
groundspeed data.
GTX 32 # 2
Control of GTX 32 transponder functions, pressure altitude data, and
groundspeed data.
GTX 33 # 1 with TIS
Control of GTX 33 transponder functions, pressure altitude data, and
groundspeed data.
GTX 33 # 2 with TIS
Control of GTX 33 transponder functions, pressure altitude data, and
groundspeed data.
MapMX
Serial position, altitude, velocity, and navigation data to the following units:
Garmin MX20 (V5.7 or later), GMX 200
WX-500 Serial communication to an L3 Communications WX-500 Stormscope.
GPS