background image

© 2017–2018 Garmin Ltd. or its subsidiaries
All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change or improve its 
products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements. Go to 

www.garmin.com

 for current updates 

and supplemental information concerning the use of this product.
Garmin

®

, the Garmin logo, ANT

®

, BlueChart

®

, FUSION

®

, GPSMAP

®

, inReach

®

, Ultrascroll

®

, and VIRB

®

 are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. 

ActiveCaptain

, Apollo

, Connect IQ

, ECHOMAP

, Fantom

, FUSION-Link

, FUSION PartyBus

, Garmin ClearVü

, Garmin Connect

, Garmin Express

, Garmin Nautix

, Garmin 

Quickdraw

, GC

, GCV

, GMR

, GRID

, GXM

, HomePort

, LiveScope

, MotionScope

, OneChart

, OneHelm

, Panoptix

, Reactor

, Shadow Drive

, SmartMode

, and SteadyCast

 are 

trademarks of Garmin Ltd. or its subsidiaries. These trademarks may not be used without the express permission of Garmin.
Apple

®

 is a trademark of Apple Inc., registered in the U.S. and other countries. Android

 is a trademark of Google

 Inc. The BLUETOOTH

®

 word mark and logos are owned by the Bluetooth SIG, 

Inc. and any use of such marks by Garmin is under license. CZone

 is a trademark of Power Products, LLC. FLIR

®

 is a registered trademark of FLIR Systems, Inc. NMEA

®

, NMEA 2000

®

, and the 

NMEA 2000 logo are registered trademarks of the National Marine Electronics Association. SD

®

 and the SDHC logo are trademarks of SD-3C, LLC. SiriusXM

®

 is a registered trademark of 

SiriusXM Radio Inc. Wi

Fi

®

 is a registered mark of Wi-Fi Alliance Corporation. Windows

®

 is a registered trademark of Microsoft Corporation in the United States and other countries. Yamaha

®

, the 

Yamaha logo, Command Link Plus

®

, and Helm Master

®

 are trademarks of the YAMAHA Motor Co., LTD. All other trademarks and copyrights are the property of their respective owners.

Summary of Contents for GPSMAP A12











































































Reviews: