Sending a Quick Message
Quick messages are predefined messages that you prepare on your account at
. Quick
messages contain custom text, and are not assigned to a specific contact in your account. They can be used as
needed when sending or replying to inReach messages on the chartplotter.
1 From the InReach® page, select Conversations.
TIP: You can also access inReach conversations from All Communications > Conversations in the
messages and warnings menu (
Messages and Warnings, page 150
).
2 Select an existing conversation or start a new conversation (
Starting a New Conversation, page 134
).
3 Select Send Quick Message, and select the preset message to send.
4 Review the message, and select Send.
Sending a Custom Message
1 From the InReach® page, select Conversations.
TIP: You can also access inReach conversations from All Communications > Conversations in the
messages and warnings menu (
Messages and Warnings, page 150
).
2 Select an existing conversation or start a new conversation (
Starting a New Conversation, page 134
).
3 Select Send Custom Message.
4 Compose the message, and select Done.
5 Review the message, and select Send.
inReach SOS Calls
WARNING
Before you can use the SOS function, you must have an active satellite subscription on the connected inReach
device. Always test your device before you use it outdoors.
Ensure the inReach device has a clear view of the sky when using the SOS function, because this feature
requires satellite access to operate properly.
NOTICE
Some jurisdictions regulate or prohibit the use of satellite communications devices. It is the responsibility of the
user to know and follow all applicable laws in the jurisdictions where the device is intended to be used.
When a compatible inReach device is paired to the chartplotter, you can contact the Garmin Response
SM
center
to request help. From the chartplotter, you can initiate, cancel, and monitor the status of an inReach SOS call, as
well as communicate with the Garmin Response team while you wait for help to arrive.
You should only use the SOS function in a real emergency situation.
Sending an inReach SOS Call
You must pair a compatible inReach device with your chartplotter before you can send an inReach SOS call
using the chartplotter.
1 From any screen, select SOS.
2 Select Activate inReach SOS.
The chartplotter initiates an SOS call from the paired inReach device, and creates an entry on the Conversations
page. You can communicate with the Garmin Response team using this conversation.
CAUTION
When an inReach SOS call is active do not turn off or attempt to turn off the inReach device or connected
chartplotter. Doing so could prevent this feature from operating properly and could delay receipt of assistance
in the event of an emergency
inReach
®
Messages
135
Summary of Contents for GPSMAP 9 3 Series
Page 1: ...GPSMAP OWNER SMANUAL 12x3 9x3 7x3...
Page 14: ......
Page 221: ......
Page 222: ...support garmin com GUID 3E67C80C 0812 4EEC BC60 699751B9CF6F v4 January 2024...