Garmin GPSMAP 86, Owner'S Manual

Page: 41 / 58

Bluetooth Settings
Select Setup > Bluetooth.
Status: Enables Bluetooth wireless technology, and shows current connection status.
Notifications: Shows or hides smartphone notifications.
Forget Phone: Removes the connected device from the list of paired devices. This option is available only after
a device is paired.
Wi
‑
Fi Settings
Select Setup > Wi-Fi.
Wi-Fi: Enables wireless technology.
Add Network: Allows you to scan for and connect to a wireless network.
Routing Settings
The available routing settings vary based on the activity selected.
Select Setup > Routing.
Direct Routing: Calculates the most direct route possible to the destination.
Activity: Sets an activity for routing. The device calculates routes optimized for the type of activity you are
doing.
Calculation Method: Sets the method used to calculate your route.
Lock On Road: Locks the blue triangle, which represents your position on the map, onto the nearest road. This
is most useful when driving or navigating on roads.
Off Route Recalculation: Sets recalculation preferences when navigating away from an active route.
Avoidance Setup: Sets the types of roads, terrain, and transportation methods to avoid while navigating.
Route Transitions: Sets how the device routes from one point on the route to the next. This setting is available
only when the Direct Routing option is enabled. The Distance option routes you to the next point on the route
when you are within a specified distance of your current point.
Setting the Device Tones
You can customize tones for messages, keys, turn warnings, and alarms.
1 Select Setup > Tones.
2 Select Sounds.
3 Select an option:
• To enable both tones and vibration, select Tone & Vibration.
• To enable only tones, select Tone.
• To enable only vibration, select Vibration.
4 Select Volume to set the tone volume.
5 Select a tone for each audible type.
Customizing the Device 35