Introduction
WARNING
See the
Important Safety and Product Information
guide in the
product box for product warnings and other important
information.
GPSMAP 8000 Series Front View
The location of items varies based upon the model. This image
and table are representations of the GPSMAP 8000 series
devices.
À
Power key
Á
Automatic backlight sensor
Â
Touchscreen
Inserting a Memory Card
You can use optional memory cards in the chartplotter. Map
cards allow you to view high-resolution satellite imagery and
aerial reference photos of ports, harbors, marinas, and other
points of interest. You can use blank memory cards to transfer
data such as waypoints, routes, and tracks to another
compatible Garmin chartplotter or a computer.
1
Open the door
À
on the memory card reader.
2
Insert the memory card
Á
with the label facing away from the
door.
3
Press the card in until it clicks.
4
Close the card reader door.
Using the Touchscreen
• Tap the screen to select an item.
• Drag or swipe your finger across the screen to pan or scroll.
• Pinch two fingers together to zoom out.
• Spread two fingers apart to zoom in.
Locking the Touchscreen
You can lock the touchscreen to prevent inadvertent screen
touches.
1
Select .
2
Select
Lock Touchscreen
.
Tips and Shortcuts
• Select
Home
from any screen to return to the Home screen.
• Select
Menu
from any main screen to access additional
settings about that screen.
• Press to adjust the backlight and lock the touchscreen.
• Hold to turn the chartplotter on or off.
GPS Satellite Signals
When you turn on the chartplotter, the GPS receiver must
collect satellite data and establish the current location. When
the chartplotter acquires satellite signals,
appears at the top
of the Home screen. When the chartplotter loses satellite
signals,
disappears and a flashing question mark appears
over on the chart.
For more information about GPS, go to
www.garmin.com
/aboutGPS
.
Stations and Station Layouts
When multiple displays are installed on the Garmin® Marine
Network, you can group them together into a station. A station
enables the displays to work together, rather than as several
separate displays.
When you select
Home
on one display, each display in the
station returns to the Home screen. With the SmartMode™
feature, when a button is selected from the Home screen, each
display in the station can show unique information. For
example, when
Cruising
is selected from the Home screen,
one display can show the Navigation chart and another display
can show the Radar screen.
You can customize the layout of the pages on each display,
making each page different on each display. When you change
the layout of a page in one display, the changes appear only on
that display. When you change the name and symbol of the
layout, those changes appear on all displays in the station, to
maintain a consistent appearance.
Customizing the Home Screen
You can add items to and remove items from the Home screen.
Any customization made to one Home screen in the station
appears on all displays in the station.
1
From the Home screen, select
Menu
.
2
Select an option:
• To add an item to the Home screen, select
Add Layout
,
and select the item to add.
• To remove an item, select
Delete Layout
, and select the
item to remove.
Customizing the Layout of a Page
When you are using a multi-display station and you change the
layout of a page in the display you are interacting with, the
changes appear only on that display, except for the name and
symbol. If you change the name or symbol for the layout, that
change appears on all displays in the station.
1
From the Home screen, select an item to edit.
2
Select
Menu
>
Edit Layout
.
3
Select an option:
• To change the name of the layout, select
Name &
Symbol
>
Name
, enter a new name, and select
Done
.
• To change the symbol for the layout, select
Name &
Symbol
>
Symbol
, and select a new symbol.
• To change the number of functions shown, select
Functions
, and select a number.
• To change the vertical or horizontal orientation of a multi-
function display, select
Split
, and select an option.
• To change how data appears on the page, select
Overlays
, and select an option.
Introduction
1
