manualshive.com logo in svg

Garmin GPSMAP 8 10 Series, Owner'S Manual

Introducing the Garmin GPSMAP 8 10 Series – a cutting-edge navigation solution for explorers. Ensure smooth journeys with this advanced GPS device, backed by an intuitive Owner's Manual. Download the comprehensive manual for free and unleash the true potential of your Garmin GPSMAP 8 10 Series at manualshive.com.

Share
Download
background image

Showing Satellite Imagery on the Navigation Chart

NOTE: This feature is available with premium charts, in some areas.
You can overlay high-resolution satellite images on the land or on both land and sea portions of the Navigation 
chart.
NOTE: When enabled, high-resolution satellite images are present only at lower zoom levels. If you cannot see 
high-resolution images in your optional chart region, you can select   to zoom in. You also can set the detail 
level higher by changing the map zoom detail.
1 From the Navigation chart, select Menu > Layers > Chart > Satellite Photos.
2 Select an option:

• Select Land Only to show standard chart information on the water, with photos overlaying the land.

NOTE: This setting must be enabled to view Standard Mapping

®

 charts.

• Select Photo Map to show photos on both the water and the land at a specified opacity. Use the slider bar 

to adjust the photo opacity. The higher you set the percentage, the more the satellite photos cover both 
land and water.

Viewing Aerial Photos of Landmarks

Before you can view aerial photos on the Navigation chart, you must turn on the Photo Points setting in the 
chart setup (

Chart Layers, page 34

).

NOTE: This feature is available with premium charts, in some areas.
You can use aerial photographs of landmarks, marinas, and harbors to help orient yourself to your surroundings 
or to acquaint yourself with a marina or a harbor prior to arrival.
1 From the Navigation chart, select a camera icon:

• To view an overhead photo, select 

.

• To view a perspective photo, select 

. The photo was taken from the location of the camera, pointed 

in the direction of the cone.

2 Select Photo.

Automatic Identification System

The Automatic Identification System (AIS) enables you to identify and track other vessels, and alerts you to 
area traffic. When connected to an external AIS device, the chartplotter can show some AIS information about 
other vessels that are within range, that are equipped with a transponder, and that are actively transmitting AIS 
information.
The information reported for each vessel includes the Maritime Mobile Service Identity (MMSI), location, GPS 
speed, GPS heading, time that has elapsed since the last position of the vessel was reported, nearest approach, 
and time to the nearest approach.
Some chartplotter models also support Blue Force Tracking. Vessels being tracked with Blue Force Tracking 
are indicated on the chartplotter with a blue-green color.

Charts and 3D Chart Views

29

Summary of Contents for GPSMAP 8 10 Series













































































































































































































Reviews:

No comments

Related manuals for GPSMAP 8 10 Series

Garmin DriveLuxe 50 Owner'S Manual preview
DriveLuxe 50
Brand: Garmin Pages: 26
TRACKIMO Trackimo User Manual preview
Trackimo
Brand: TRACKIMO Pages: 9
Garmin MSN Direct Receiver Owner'S Manual Supplement preview
MSN Direct Receiver
Brand: Garmin Pages: 12
Camoplast TATOU 4S Manual preview
TATOU 4S
Brand: Camoplast Pages: 24
Navman Tracker 5507 Installation And Operation Manual preview
Tracker 5507
Brand: Navman Pages: 79
Maxcom Navi 351 User Manual preview
Navi 351
Brand: Maxcom Pages: 16
Canyon CNE-ST02BB Quick Manual preview
CNE-ST02BB
Brand: Canyon Pages: 62
Garmin DAKOTA Owner'S Manual preview
DAKOTA
Brand: Garmin Pages: 48
12trace GeoChaser Control Manual preview
GeoChaser Control
Brand: 12trace Pages: 9
Queclink GT500 User Manual preview
GT500
Brand: Queclink Pages: 11
Queclink GL521MG User Manual preview
GL521MG
Brand: Queclink Pages: 15
Queclink EA00004 User Manual preview
EA00004
Brand: Queclink Pages: 16
Queclink GV200G User Manual preview
GV200G
Brand: Queclink Pages: 27
Follow Fast Follow Fast Cars Quick Start Manual preview
Follow Fast Cars
Brand: Follow Fast Pages: 6
Agrident AWR250 User Manual preview
AWR250
Brand: Agrident Pages: 45
Becker Highspeed 7934 Specifications preview
Highspeed 7934
Brand: Becker Pages: 2
Enfora MT4100 Installation Manual preview
MT4100
Brand: Enfora Pages: 6
Gosafe G606 User Manual preview
G606
Brand: Gosafe Pages: 30

Brands by name

Popular brands

Load more brands