Garmin GPSMAP 495 Owner'S Manual Download

Page: 3 / 179

GPSMAP 495 Owner’s Manual

Introduction >

About This Manual

Introduction

Thank you for choosing the Garmin GPSMAP

495, an unsurpassed

portable aviation receiver that utilizes the proven performance of

Garmin GPS, AOPA Airport Directory (USA only), SafeTaxi Airport

Diagrams (USA only), Terrain/Obstacle database (USA & Europe

only), and Jeppesen database.

About This Manual

To get the most out of your new navigation system, read this manual

and learn the operating procedures for your unit.

Manual Conventions

This manual uses the term

Warning

to indicate a potentially

hazardous situation, which, if not avoided, could result in death or

serious injury.
This manual uses the term

Caution

to indicate a potentially

hazardous situation, which, if not avoided, may result in minor

injury or property damage. It may also be used without the symbol

to alert you to avoid unsafe practices.

Summary of Contents for GPSMAP 495




















































































































































































Search results

Summary of Contents for GPSMAP 495

Reviews:

Related manuals for GPSMAP 495

Brands by name

Popular brands

Garmin GPSMAP 495, Owner'S Manual

Search results

Summary of Contents for GPSMAP 495

Reviews:

Related manuals for GPSMAP 495

Brands by name

Popular brands