Garmin GPSMAP 495 Owner'S Manual Download

Page: 25 / 179

GPSMAP 495 Owner’s Manual

Aviation

Basic Operation in Aviation Mode >

Viewing AOPA Airport Directory Information and SafeTaxi Diagrams

Viewing AOPA Airport Directory Information

NOTE:

AOPA Airport Directory Information is currently

available in the United States only.

The AOPA Airport Directory contains airport statistics such as

pattern altitudes, noise abatement information, FBO phone numbers,

hours of operation, local attractions, ground transportation, lodging,

and services.

To view the AOPA Airport Directory information:

1. Select an airport using the map or the

NRST/FIND

key.

2. Use the

ROCKER

to select the

AOPA

tab.

3. Press up and down on the

ROCKER

to scroll through the AOPA

Directory listings.

AOPA Airport Directory Tab

AOPA Service Icon Legend

Viewing SafeTaxiTM Diagrams

NOTE:

SafeTaxi is currently available in the United States only.

Garmin SafeTaxi diagrams provide detailed taxiway diagrams and

position information on more than 650 airports in the USA. Taxi

diagrams are integrated in the Map Page.

To view a SafeTaxi diagram:

1. Zoom in on an airport that has a taxi diagram available.
2. Use the

ROCKER

to view items on the taxi diagram.

SafeTaxi Airport Diagram

Summary of Contents for GPSMAP 495




















































































































































































Search results

Summary of Contents for GPSMAP 495

Reviews:

Related manuals for GPSMAP 495

Brands by name

Popular brands

Garmin GPSMAP 495, Owner'S Manual

Search results

Summary of Contents for GPSMAP 495

Reviews:

Related manuals for GPSMAP 495

Brands by name

Popular brands