Garmin GPSMAP 276C Owner'S Manual Download

Page: 121 / 134

How Are MMSI Assignments Obtained?

Non-commercial users, such as recreational users, who remain

in United States waters and only carry VHF, EPIRB (Emergency

Position Indicating Radio Beacons), and Radar are not required to

have a FCC ship station license. The FCC and Coast Guard have

authorized some second and third-party vendors to assign MMSI

numbers. This service is limited to registering recreational vessels

only. To receive information on how to obtain a recreational MMSI

number, contact

http://www.uscg.mil/rescue21/links/mmsi.htm or

http://wireless.fcc.gov/marine/

Non-Federal Users in the United States

Commercial users, or those who travel outside the United States or

Canada, must apply for a ship station license or an amendment to a

ship station license. To find out if you require a Ship Station license,

contact

http://wireless.fcc.gov/marine/fctsht14.html

. If your vessel

requires licensing by the FCC, you can obtain a MMSI during the

application/licensing process when you file FCC Forms 159 and

605.

Federal Users in the United States

Federal users can obtain MMSI assignments from their agency

radio spectrum management office. These procedures are currently

under review by the National Telecommunications and Information

Administration (NTIA).

Users Outside the United States

Users can obtain an MMSI assignment from their telecommunications

authority or ship registry, often by obtaining or amending their ship

station license.

Users In Canada

Industry Canada is responsible for assigning MMSI numbers to

commercial and recreational vessels. Information is available at the

following Web site:

http://apollo.ic.gc.ca/english/mmsi.html

How Can Garmin Help You with DSC?

To receive distress calls or position reports, you must have a DSC-

equipped chartplotter as well as a VHF radio with DSC support.

During normal, non-emergency position report communication,

Channel 70 (156.525 MHz) has been set aside as the VHF/DSC

digital call channel.
For a distress call, press the MayDay button on the VHF radio. The

call transmits on an emergency channel with the MMSI number

attached to the call, if the receiver has DSC support. Any DSC-

equipped mariner (on sea or land) within range can receive the call.
When the GPSMAP 276C is connected to a VHF with DSC support,

the GPS unit shows a call list, log, and a directory. Basic wiring

is required for the Garmin unit and VHF radio to send and receive

NMEA data from each other.

GPSMAP 276C Owner’s Manual

PPendIx

IgItAl

electIve

AllIng

(dsc)

Summary of Contents for GPSMAP 276C







































































































































Search results

Summary of Contents for GPSMAP 276C

Reviews:

Related manuals for GPSMAP 276C

Brands by name

Popular brands

Garmin GPSMAP 276C, Owner'S Manual

Search results

Summary of Contents for GPSMAP 276C

Reviews:

Related manuals for GPSMAP 276C

Brands by name

Popular brands