8-12
To set the backlighting time-out...
· Highlight the backlighting time-out field.
· Enter the desired time for backlighting to remain on. If you wish to have
the backlighting on at all times, enter zero.
· Press ENT.
8.11 INTERFACE SETUP
From the Interface Page, you may
select the input and/or output format
needed to connect your GPS 95 to
other equipment: PC, NMEA device,
etc. You may select no input/output
(NONE/NONE), GARMIN input/output
(GARMIN/GARMIN), NMEA output
(NONE/NMEA), RTCM input/NMEA
output (RTCM/NMEA) or RTCM input
(RTCM/NONE).
When the NMEA output is selected a second cyclic field appears. From this
second field you may select the desired NMEA format: NMEA 0180, NMEA
0182, or NMEA 0183.
To select a NMEA output...
· Place the cursor on the input/output format field.
· Press CLR until the desired NMEA output option (NONE/NMEA or
RTCM/NMEA) is displayed.
· Press the right arrow key.
· Select the desired NMEA format by pressing CLR.
A second cyclic field also appears
when the GARMIN input/output is
selected. The GARMIN option allows
you to exchange data such as
waypoints, routes, track logs and
satellite almanac data with another
GPS 95 or with a PC-compatible
computer. You may select between
acting as a host to data exchanges (Host), requesting data (Req) or sending
data (Send). During the data transfer process the number of data packets
being exchanged will be displayed.
