Garmin GPS 155TSO, Owner'S Manual

Page: 68 / 132

The ‘cum or leg’ field can be selected to display cumulative distance and ete/eta or
the distance and ete/eta for each individual route leg. If cumulative is selected, the
first leg’s distance will be displayed, while the second leg will represent the first leg’s
distance plus the second leg, and so on. This also applies to the ete/eta field, which
may also be configured to display the desired track (dtk) for each leg, regardless of
the cumulative or leg selection.
To change the leg and ete/eta fields:
1. With the flashing cursor active, rotate
O
to highlight the field you want to change.
2. Rotate
K
to select the desired setting and press
C
.
The active route page may also be used to create a new route or edit the route you
are currently navigating (approach, SID or STAR waypoints cannot be edited), and
provides a fast method of selecting any route waypoint as your next destination way-
point without modifying the active route. If you are editing the active route and want
to save it in its original form, copy it to an open storage route before editing.
To add waypoints to the active route:
1. Press
C
, if necessary, to activate the cursor.
2. Use
O
to highlight the first blank waypoint field or highlight the waypoint
you would like to add the new waypoint BEFORE.
3. Use
K
and
O
to enter the new waypoint identifier. Press
E
.
4. Press
E
to accept or
\
to cancel. The cursor will automatically move to the next
waypoint field, and the remaining route waypoints (if any are present) will move down
the list accordingly.
58
DIRECT-TO & ROUTE NAV
Adding Active Route Waypoints
Adding a waypoint to the active route.
Active route page with desired track displayed.
Confirming the new route waypoint.
155man (GOOD) 7/24/98 1:57 PM Page 58