Garmin GNS 530W, Pilot'S Manual & Reference

Page: 191 / 230

9 - AUX PAGES
181
Setup 1 Page
To change the position format:
1. Select “Units / Position” from the Setup
Page.
2. Turn the large right knob to highlight the
“Position Format” field.
3. Turn the small right knob to select the desired
position format. The following position formats
are available:
• hdd°mm.mmm — latitude and longitude in
degrees and decimal minutes
• hdd°mm’ss.s” — latitude and longitude in
degrees, minutes and decimal seconds
• MGRS — Military Grid Reference System
• UTM/UPS — Universal Transverse Mercator /
Universal Polar Stereographic grids
4. Press
ENT
to accept the selected format.
Map Datum:
The Map Datum may not be changed.
NOTE: Per TSO C146a, the WGS-84 map datum is used.
Date / Time
To display local time or UTC:
1. Select “Date / Time” from the Setup Page.
2. The flashing cursor highlights the “Time
Format” field. Turn the small right knob to
display a window of available time formats:
Local 12hr, Local 24hr, or UTC.
3. Continue turning the small right knob to
select the desired time format.
4. Press
ENT
to accept the selection.
To set the local time:
1. Select “Date / Time” from the Setup Page.
2. Turn the
large right
knob to highlight the
time offset field.
3. Use the
small
and
large right
knobs to enter the
desired offset, beginning by entering a minus (-) or
plus (+) sign to indicate whether the offset is
behind UTC or ahead of UTC. (In the United
States, all local time offsets are minus, or
behind UTC.)