Garmin GNS 530W, Pilot'S Manual & Reference

Page: 177 / 230

9 - AUX PAGES
167
Flight Planning
manual transfer can also be done on command. If
either of the messages “data transfer error” or “data
transfer cancelled” are received during an automatic or
manual transfer, the pilot must force another transfer.
To transfer flight plans or user waypoints to/from a
second 500W-Series (or 400W-Series) unit:
1. Select “Crossfill” from the Flight Planning
Page.
2. The flashing cursor highlights the method field.
Turn the
small right
knob to select “Auto”
or “Manual”. “Auto” automatically transfers
any selection of (or any change to) a direct-to
destination or active flight plan to a second
500W/400W-Series Garmin unit.
From the METHOD field, turn the small right
knob to select “Auto” or “Manual”. “Auto”
automatically transfers direct-to or active
flight plan selections between units.
3. The flashing cursor highlights the transfer data
option (TRANSFER) field. Turn the
small right
knob to display a window of available data
options:
Turn the small right knob to display a list
of TRANSFER options. Continue turning the
small right knob to select the desired option.
• Active Flight Plan — transfers the active
flight plan to/from a second 500W-Series
(or 400W-Series) Garmin unit in a dual unit
installation. This option is the default when
selecting “Crossfill” from the Flight Planning
Page. Active Flight Plan information is auto-
matically transferred between units when the
“Auto” method is selected above.
• Flight Plan — transfers any stored flight plan
to/from a second 500W-Series (or 400W-
Series) unit, by selecting the flight plan by
number. This option is the default when
selecting “Crossfill” from the Flight Plan Cata-
log.
• User Waypoints (all) — transfers all stored
user waypoints to/from a second 500W/400W-
Series unit.
• User Waypoint — transfers the specified
user waypoint to a second 500W/400W-Series
unit.