background image

10

GMR 404/406 Marine Radar Installation Instructions

 

Specifications

Open Array Scanner

Range

20 meters minimum, 72 nm max

Range discrimination

20 meters

Radar interference

Anti-jamming algorithm

Clutter suppression

Sea Clutter

Rain Clutter

FTC

Weight

42 lbs (19 kg)

Dimensions

17” x 11” x 16”

Cable

15 meters long
8.4 lbs (3.8 kg)

Radar Display Features

Presentation Modes

North up, Course up, Heading up

VRM/EBL

2 user adjustable, capable of  

floating

Bearing Accuracy

1 degree

Range Ring Accuracy

20 meters or ±1.5% of range scale, 

whichever is greater.

Controls

Auto & Manual Gain Adjust;  

Manual or Auto (AFC) receiver 

tuning; Manual adjust for Rain 

Clutter and 3 presets for Sea Clut-

ter; FTC presets.

Radar/Chart Overlay

Overlay mode is supported.  Also 

has split overlay with standard 

radar presentation

Zoom Mode

2x, 4x

Trails (Wakes)

Short, Medium, Long

Guard Zone Alarm

2 guard zones – user adjustable

Off center Function

Look ahead, Auto Shift and Manual

Antenna RPM

Selectable to 24 or 48 rpm

MARPA

Tracks up to 10 MARPA targets for 

radar plotting and collision avoid-

ance.  (Heading sensor is required)

Summary of Contents for GMR 404


















Reviews: