190-00858-11
GMA 35/35c Installation Manual
Rev. H
Page 3-3
3.6 GMA 35 Unit Installation
CAUTION
Do not use excessive force when inserting the GMA 35 into the rack. This may damage the
connectors, unit, and/or rack. If heavy resistance is felt during installation, stop! Remove
the GMA 35 and identify the source of resistance.
For final installation and assembly, refer to the outline and installation drawings shown in Appendix B of
this manual.
1. Assemble the backshell as described in Section 3.5.
2. Connect both backshells to the rear plate using the screws provided in the connector kit.
3. Mount the GMA 35 rack to the GTN rack as shown in Appendix B. Refer to the GTN 7XX
Installation Manual for GTN installation rack guidance.
4. Assemble the rear plate into the GMA 35 unit rack.
5. Insert the GMA 35 into the rack, noting proper orientation as shown on the installation drawing in
Appendix B.
6. Lock the GMA 35 in place using the appropriate size hex wrench.
