190-00858-11
GMA 35/35c Installation Manual
Rev. H
Page 1-2
1.2.1
Interface Summary
•
Behind-the-panel mounting for panel space savings
•
Configurable without removal from installation
•
Telligence
TM
Voice Command and voice feedback
•
Supports both DSP intercom auto-squelch and manual intercom squelch modes
•
DSP audio processing for low noise, high fidelity, highly configurable and upgradable operation
•
Six/Seven position intercom (pilot, copilot, four/five passengers)*
•
Remote toggling of passenger isolation supported (passengers can change their ICS ISO state)
•
User selectable MUSIC/TEL input distribution to ICS positions independent of isolation modes
•
Clearance recorder with playback
•
Individual processing of muting thresholds for inputs to reduce noise from wiring
•
Marker beacon receiver with SmartMute audio muting
•
COM swap/cycle input
•
PA mode for keyed addressing to speaker and headsets
•
Power-off fail safe connection for Pilot PTT, Pilot mic, and Pilot’s Headset-Left to COM 1
•
Bluetooth audio streaming (GMA 35c only)
•
Bluetooth telephone integration (GMA 35c only)
*Depends on configuration settings
1.3 Technical Specifications
It is the responsibility of the installing agency to obtain the latest revision of the GMA 35 Environmental
Qualification Form. This form is available directly from Garmin under the following part number:
GMA 35 Environmental Qualification Form, Garmin part number 005-00567-01
To obtain a copy of this form, see the dealer/OEM portion of the Garmin web site (www.garmin.com).
1.3.1
Physical Characteristics
Table 1-1. GMA 35 Physical Characteristics
Characteristic
Specification
Rack Height
1.48 inches (37.6 mm)
Rack Width
6.29 inches (159.8 mm)
-00 Weight (Unit Only)
1.4 lb (0.6 kg)
-20 Weight (Unit Only)
1.3 lb (0.6 kg)
-40 Weight (Unit Only)
1.3 lb (0.6 kg)
-00 Weight (Installed with rack and
connectors)
2.2 lb (1.0 kg)
-20 Weight (Installed with rack and
connectors)
2.1 lb (1.0 kg)
-40 Weight (Installed with rack, connectors,
and antenna)
2.2 lb (1.0 kg)
