GMA 347 Installation Manual
Page 5-1
190-00325-01
Revision A
5
POST INSTALLATION CONFIGURATION AND CHECKOUT
PROCEDURE
5.1
Post Installation Configuration Harness
Refer to figure 4-3 for GMA 347 Configuration Upload Connections.
5.2
Program Information
Garmin Product
GMA 347 Configuration Tool
Used for:
GMA 347, GMA 347H, GMA 347 2ADF
Program Archive
006-A0115-00
File Name
GMA_CONFIG.EXE
GMA_CONFIG.EXE version at time of this document
2.02
5.3
GMA Configuration Tool Version
NOTE
To find the version of the GMA Configuration Tool, right click anywhere along the top
of the GMA Configuration Tool window and choose “About GMA Configuration Tool”.
See Figure 5-1.
Figure 5-1 About GMA Config Tool
5.4
Configuration Tool Introduction
References to the GMA 347 throughout this document apply to all versions of the GMA 347 unit types,
the GMA 347, GMA 347H, and the GMA 347 2ADF.
The GMA Configuration Tool, GPN 006-A0115-00, is used to configure the GMA 347 through a PC
serial port. The GMA Configuration Tool allows the ability to send updated configuration information
and upload SYSTEM or BOOT BLOCK Hex file code to a GMA 347 via a PC’s RS-232 COM port. The
application can also be used to query the GMA 347 for its current configuration information. Figure 5-2
shows the configurations that can be altered. Each configuration item has a SET value and an ACTIVE
value. The ACTIVE value is what the unit currently has stored, and the SET value is used to change the
current ACTIVE state.