Garmin G1000H, Pilot'S Manual, Page: 211 / 542

190-01255-00 Rev. A
Garmin G1000H
™
Pilot’s Guide for the Bell 407GX
199
FLIGHT MANAGEMENT
NOTE:
If the imported flight plan contains a waypoint with a name that duplicates the name of a waypoint
already stored on the system, the system compares the coordinates of the imported waypoint with those of
the existing waypoint. If the coordinates are different, the imported waypoint is automatically renamed by
adding characters to the end of the name.
Exporting a Flight Plan to an SD Card
1) Insert the SD card into the top card slot on the MFD.
2) Press the
FPL Key to display the Active Flight Plan Page on the MFD.
3) Turn the small
FMS
Knob to select the Flight Plan Catalog Page.
4) Press the
FMS
Knob to activate the cursor.
5) Turn the large FMS Knob to highlight the flight plan to be exported.
6) Press the
EXPORT
Softkey; or press the
MENU
Key, select “Export Flight Plan”.
7) If desired, change the name for the exported file by turning the large
FMS
Knob to the left to highlight the
name, then use the small and large FMS knobs to enter the new name, and press the ENT Key.
8) Press the
ENT
Key to initiate the export.
9) Press the
ENT
Key to confirm the export.
NOTE:
The exported flight plan will not contain any procedures or airways.
Figure 5-59 Flight Plan Export
Import/Export Softkeys Stored Flight Plan to be Exported &
Exported Flight Plan Name
Export Successful