Garmin G1000:Piper, Pilot'S Manual

Page: 348 / 450

Garmin G1000 Pilot’s Guide for Piper PA32
190-00692-00 Rev. B 6-68
HAZARD AVOIDANCE
ALTITUDE DISPLAY MODE
Changing the altitude display mode:
1) On the Traffic Page, press the ALT MODE Softkey.
2) Press one of the following softkeys:
• BELOW
• NORMAL
•
ABOVE
• UNREST
3) Press the
BACK
Softkey to return to the main Traffic Page.
OR
:
1) Press the MENU Key.
2) Turn the small
FMS
Knob to select one of the following:
• BELOW
• NORMAL
• ABOVE
• UNRESTRICTED
3)
Press the ENT Softkey.
Displaying traffic on the Traffic Map Page:
1) Select the Map Page Group.
2) Select the second rectangular page icon.
3) Press the OPERATE Softkey to begin displaying traffic. ‘TAS OPERATING’ is displayed in the upper left corner of
the page.
4) Press the ALT MODE Softkey to change the altitude volume.
5) Select the desired altitude volume by pressing the BELOW , NORMAL , ABOVE , or UNREST (unrestricted) Softkey.
The selection is displayed in the Altitude mode field in the upper left.
6) Press the STANDBY Softkey to place the system in the Standby mode. ‘TAS STANDBY’ displays in the upper left
corner of the page.
7) Turn the Joystick clockwise to display a larger area or counter-clockwise to display a smaller area.