G1000 Supplemental Maintenance Manual
Page 7-11
Textron Nav III Series
Revision 3
190-02128-04
2. Press the
CLR ALL
softkey.
3. Scroll the cursor to GIA CERT software box, and press the
ENT
key to check the box.
4. Press
“Load”
softkey.
5. Monitor load progress. Verify software load completes without errors as indicated by the
following:
•
Green “PASS” in the Configuration and Software columns for each item loaded.
•
“Upload Complete………….”COMPLETE” in the summary box.
6. Acknowledge the prompt by pushing the
ENT
key.
KAP 140 Autopilot (For GIA 2 replacement) (if installed)
1. In the ITEM window highlight
“Option – KAP 140 Installation”
and press the
ENT
key
on PFD.
2. Press the
CLR ALL
softkey.
3. Scroll the cursor to GIA2 configuration box, and press the
ENT
key to check the box.
4. Press
“Load”
softkey.
5. Monitor load progress. Verify software load completes without errors as indicated by the
following:
•
Green “PASS” in the Configuration and Software columns for each item loaded.
•
“Upload Complete………….”COMPLETE” in the summary box.
6. Acknowledge the prompt by pushing the
ENT
key.
Transponder GIA Configuration (For GIA 1 or GIA 2 replacement)
1. In the ITEM window highlight either
“Baseline Option – GTX 335 Installation” or
“Baseline Option – GTX 345 Installation, without GTS 800” or “Baseline Option –
GTX 345 Installation, with GTS 800” or “Baseline Option – Legacy – GTX 33 ES
Installation”
(as applicable) and press the
ENT
key on the PFD.
2. Press the
CLR ALL
softkey.
3. Scroll the cursor to GIA1 or GIA 2 configuration box, whichever was replaced, and press
the
ENT
key to check the box.
4. Press
“Load”
softkey.
5. Monitor load progress. Verify software load completes without errors as indicated by the
following:
•
Green “PASS” in the Configuration and Software columns for each item loaded.
•
“Upload Complete………….”COMPLETE” in the summary box.
6. Acknowledge the prompt by pushing the
ENT
key.
ADF GIA Configuration (For GIA 2 replacement and aircraft equipped with a
ADF only)
Summary of Contents for G1000 NXi
Page 61: ......