Port Identification
Item
Description
ANT
Connects the stereo to a typical AM/FM antenna using an RF coaxial connector.
If you are installing the stereo on a boat with a metal hull, you must use a ground-dependent antenna,
and if you are installing the stereo on a boat with a non-metal hull, you must use a ground-independent
antenna. See the installation instructions provided with your antenna for more information.
ACC
Connects to a Fusion DAB module to receive DAB stations where available (not included).
NMEA
Connects the stereo to a NMEA 2000 network ("N" models only) (
NMEA 2000 System Wiring Diagram,
).
USB
Connects the stereo to a USB source.
FUSE
Contains the fuse for the device.
See the device specifications for replacement fuse information.
Connects the stereo to the power and speaker wiring harness.
Connects the stereo to the auxiliary in and line/subwoofer out wiring harness.
Reserved for future use.
5
