13 Place the stereo in the cutout.
14 Secure the stereo to the mounting surface using the included screws .
15 Snap the screw covers in place .
Replacing an Existing Stereo
1 Remove and disconnect the existing stereo.
2 If necessary, remove the existing wiring harness or install a vehicle- or vessel-specific wiring-harness adapter
(not included) to provide access to the power and speaker wiring.
3 Place the mounting gasket on the back of the stereo .
4 Place the mounting bracket behind the mounting surface.
5 Make the necessary wiring connections (
Connection Considerations, page 4
).
6 Place the stereo in the opening.
7 Secure the stereo to the mounting bracket using the included screws .
NOTE: You might need to reach behind the mounting surface to hold the bracket in place when securing the
stereo to the bracket.
8 Snap the screw covers in place .
Connection Considerations
The stereo must be connected to power, to speakers, and to media input sources to function correctly. You
should carefully plan the layout of the stereo, wired remote, speakers, optional NMEA 2000
®
network, and your
input sources before making any connections.
4
