Garmin FORCE KRAKEN, Replacement Instructions Manual, Page: 2 / 14

Device Overview
Shaft cap
Power and transducer cables
Depth-adjustment collar
Steering system
Mount
Shaft
Propeller drive motor
Preparing the Motor for Transducer Replacement
Before you can replace the transducer, you must perform these actions to prepare the motor.
1 Disconnect the motor from the power source.
2 Open the shaft cap (
Opening the Shaft Cap, page 3 ).
3 Disconnect the cables in and remove the shaft cap ( Disconnecting the Cables in the Shaft Cap, page 4 ).
4 Remove the propeller drive motor from the shaft ( Removing the Propeller Drive Motor, page 5 ).
2