Garmin FORCE KRAKEN, Replacement Instructions Manual, Page: 11 / 14

4 Route the transducer cable through the nose cone so it will fit correctly onto the propeller drive motor.
5 Place the nose cone onto the propeller drive motor.
6 Using a 4 mm hex bit or wrench, secure the front of the nose cone to the propeller drive motor using the
existing two screws .
7 Using a 3 mm hex bit or wrench, secure the bottom of the nose cone to the propeller drive motor using the
existing screw .
8 Using a 4 mm hex bit or wrench, secure the skeg to the bottom of the propeller drive motor using the existing
four screws .
11