Appendix
40
Garmin fleet 590 Owner’s Manual
Changing the Fuse in the
Vehicle Power Cable
notice
When replacing the fuse, do not lose any
of the small pieces and make sure they
are put back in the proper position. The
vehicle power cable
does not work unless it is assembled
correctly.
If your device does not charge in your
vehicle, you may need to replace the
fuse located at the tip of the vehicle
adapter.
1
Unscrew the end piece.
TIP
: You may need to use a coin to
remove the end piece.
2
Remove the end piece, the silver
tip, and the fuse (glass and silver
cylinder).
3
Install a 2A fast-blow fuse.
4
Place the silver tip in the end piece.
5
Screw the end piece back into the
vehicle power cable.
Removing the Device,
Cradle, and Mount
Removing the Device from the
Cradle
1
Press up on the tab on the top of the
cradle.
2
Tilt the device forward.
Removing the Cradle from the
Mount
1
Turn the cradle to the right or left.
2
Apply pressure until the socket on the
cradle releases the ball on the mount.
Removing the Suction Cup Mount
from the Windshield
1
Flip the lever on the suction cup
mount toward you.
2
Pull the tab on the suction cup toward
you.