background image

37

On the Water

37

Appendix C

Fishfi nder 240 Portable 

When storing the Suction Cup Transducer in the case, dry the  trans-

ducer and cable to avoid corrosion.  If using in Salt Water, rinse the 
transducer and cable in fresh water and dry before storing in the case.

Batteries

The Fishfi nder 240 Portable comes with a D-Cell battery pack. Eight  

D-Cell Alkaline batteries will provide approximately 20 hours of continu-
ous operation. You have the option of purchasing a 12 Volt Rechargeable 
Gel-Cell Battery for the portable case.  If using a Gel-Cell battery you 
can anticipate approximately 40 hours of continuous operation between 
charges. Cold temperatures reduce battery life.

Installing the D-Cell Batteries:

1. Disconnect the Red and Black leads.

2. Install the batteries noting the correct polarity.

3. Reconnect the Red and Black leads and place the battery pack (batteries 

down) in the provide location within the case.

Installing a Gel Cell Battery:

Verify that the Gel-Cell battery has male spade connectors installed on 

the positive and negative leads.  

1. Disconnect the Red and Black leads and remove the D-Cell Battery 

Pack.

2. Connect the Red and Black Gel-Cell leads to the Red and Black wires 

in the portable case.

3. Place the Gel-Cell battery in the same location as the D-Cell Battery 

Pack.  The Portable Case was designed to accommodate a 12 Volt 

D-Cell and Optional Gel-Cell Battery Packs

Install the battery pack into the 
moulded location in the 
Portable case

190-00155-10 Rev A.indd

08/16/00, 2:48 PM

37

www.reelschematic.com

www.reelschematic.com

Summary of Contents for Fishfinder 240



















































Reviews: