13
Unit Operation
The Adjustment Bar
The Zoom Adjustment is used to quickly select a display zoom scale.
To change the zoom scale:
1. Highlight ‘Zoom’ on the Adjustment Bar.
2. Using the
UP
or
DOWN
Arrow, select the desired display zoom level.
When a scale other than ‘No Zoom’ is selected, the Adjustment Bar will
display a new selection labeled View.
View
The View Adjustment is available only when a Zoom Scale other than
‘No Zoom’ is selected. This setting allows you to select a specific area to
view on the display or allow the unit to automatically select a viewing area
based on the bottom.
To change the view:
1. Highlight ‘View ‘on the Adjustment Bar.
2. Press the
UP
or
DOWN
arrows to change the setting.
To have the unit automatically set a view:
1. Highlight ‘View’ on the Adjustment Bar
2. Using the
UP
or
DOWN
Arrow, move the slider to the top or bottom of
the range then release and press the Arrow again.
Zoom Adjustment
View Adjustment
190-00155-10 Rev A.indd
08/16/00, 2:46 PM
13
