Garmin ECHOMAP PLUS Owner'S Manual Download Page 95 | Manualshive

Page: 95 / 128

background image

Setting the Fuel Capacity of the Vessel

1 Select Settings > My Vessel > Fuel Capacity.
2 Enter the combined total capacity of the fuel tanks.

Synchronizing the Fuel Data with the Actual Vessel Fuel

You can synchronize the fuel levels in the chartplotter with the actual fuel in the vessel when you add fuel to
your vessel.
1 Select Gauges > Engine > MENU.
2 Select an option:

• After you have filled up all the fuel tanks on the vessel, select Fill Up All Tanks. The fuel level is reset to

maximum capacity.

• After you have added less than a full tank of fuel, select Add Fuel to Boat, and enter the amount added.
• To specify the total fuel in the vessel tanks, select Set Total Fuel Onboard, and enter the total amount of

fuel in the tanks.

Viewing the Wind Gauges

Before you can view wind information, you must have a wind sensor connected to the chartplotter.

Select Gauges > Wind.

Configuring the Sailing Wind Gauge

You can configure the sailing wind gauge to show true or apparent wind speed and angle.
1 From the wind gauge, select MENU > Sailing Wind Gauge.
2 Select an option:

• To show true or apparent wind angle, select Needle, and select an option.
• To show true or apparent wind speed, select Wind Speed, and select an option.

Configuring the Speed Source

You can specify whether the vessel speed data displayed on the gauge and used for wind calculations is based
on water speed or GPS speed.
1 From the wind gauge, select MENU > Compass Gauge > Speed Display.
2 Select an option:

• To calculate the vessel speed based on data from the water-speed sensor, select Water Speed.
• To calculate the vessel speed based on GPS data, select GPS Speed.

Configuring the Heading Source of the Wind Gauge

You can specify the source of the heading displayed on the wind gauge. Magnetic heading is the heading data
received from a heading sensor, and GPS heading is calculated by your chartplotter GPS (course over ground).
1 From the wind gauge, select MENU > Compass Gauge > Heading Source.
2 Select GPS Hdg or Magnetic.

NOTE: When moving at low speeds or when stationary, the magnetic compass source is more accurate than
the GPS source.

Gauges and Graphs

87

«
...
93
94
95
96
97
...
»

Summary of Contents for ECHOMAP PLUS

































































































































Reviews:

No comments

Related manuals for ECHOMAP PLUS

Brand: u-blox Pages: 46

Brand: Teltonika Pages: 16

Brand: Spireon Pages: 12

Brand: Raymarine Pages: 2

Brand: Raven Pages: 15

Brand: Scytek electronic Pages: 8

Brand: FALK Pages: 5

Brand: Vjoy Car Pages: 2

Brand: Vjoy Pages: 20

Brand: Gosafe Pages: 11

Brand: NorthStar Pages: 50

Brand: ANBTEK Pages: 10

Brand: ANBTEK Pages: 19

Brand: Symmetricom Pages: 90

Brand: WorldTracker Pages: 76

Brand: Eagle Pages: 54

EAGLE EXPEDITION 2

Brand: Eagle Pages: 62

Brand: 3G Quest Pages: 17

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands