Recording a Strength Training Activity
You can record sets during a strength training activity. A set is multiple repetitions (reps) of a single move.
1 From the watch face, press START.
2 Select Strength.
3 Select a workout.
The first time you record a strength training activity, you must select which wrist your watch is on.
4 Select View to view a list of workout steps (optional).
TIP: While viewing workout steps, you can press START to view an animation of the selected exercise, if
available.
5 Select Do Workout.
6 Press START to start the set timer.
7 Start your first set.
The device counts your reps. Your rep count appears when you complete at least four reps.
TIP: The device can only count reps of a single move for each set. When you want to change moves, you
should finish the set and start a new one.
8 Press LAP to finish the set and move to the next exercise, if available.
The watch displays the total reps for the set. After several seconds, the rest timer appears.
9 If necessary, press DOWN, and edit the number of reps.
TIP: You can also add the weight used for the set.
10 When you are done resting, press LAP to start your next set.
11 Repeat for each strength training set until your activity is complete.
12 After your last set, press START to stop the set timer.
13 Select Save.
Using an ANT+
®
Indoor Trainer
Before you can use a compatible ANT+ indoor trainer, you must mount your bike on the trainer and pair it with
your device (
Pairing Your Wireless Sensors, page 117
).
You can use your device with an indoor trainer to simulate resistance while following a course, ride, or workout.
While using an indoor trainer, GPS is turned off automatically.
1 From the watch face, press START.
2 Select Bike Indoor.
3 Hold MENU.
4 Select Smart Trainer Options.
5 Select an option:
• Select Free Ride to go for a ride.
• Select Follow Course to follow a saved course (
).
• Select Follow Workout to follow a saved workout (
).
• Select Set Power to set the target power value.
• Select Set Grade to set the simulated grade value.
• Select Set Resistance to set the resistance force applied by the trainer.
6 Press START to start the activity timer.
The trainer increases or decreases resistance based on the elevation information in the course or ride.
Outdoor Activities
The Descent device comes preloaded with outdoor activities, such as running and cycling. GPS is turned on for
outdoor activities. You can add new activities based on default activities, such as walking or rowing. You can
also add custom activities to your device (
Creating a Custom Activity, page 27
).
28
Activities and Apps
