Garmin DESCENT MK2 Owner'S Manual Download

Page: 130 / 148

Changing the QuickFit

Bands

1 Slide the latch on the QuickFit band, and remove the band from the watch.

2 Align the new band with the watch.
3 Press the band into place.

NOTE: Make sure the band is secure. The latch should close over the watch pin.

4 Repeat steps 1 through 3 to change the other band.

Extra Long Diving Band

Your device comes with an extra long band you can wear over a thick exposure suit.

Troubleshooting

My device is in the wrong language

You can change the device language selection if you have accidently selected the wrong language on the
device.
1 Hold MENU.
2 Scroll down to the last item in the list, and press START.
3 Press START.
4 Select your language.

Is my smartphone compatible with my device?

The Descent device is compatible with smartphones using Bluetooth technology.

Go to

www.garmin.com/ble

for compatibility information.

122

Troubleshooting

Summary of Contents for DESCENT MK2





















































































































































Search results

Summary of Contents for DESCENT MK2

Reviews:

Related manuals for DESCENT MK2

Brands by name

Popular brands

Garmin DESCENT MK2, Owner'S Manual

Search results

Summary of Contents for DESCENT MK2

Reviews:

Related manuals for DESCENT MK2

Brands by name

Popular brands