Dakota Series Owner’s Manual
37
Appendix
Attaching a Carabiner,
Lanyard, Mount,
or Other Optional
Accessory
1. Position the accessory in the
slots on the mounting spine of the
Dakota.
Accessory
(carabiner)
Clip
Mounting
spine
2. Slide the clip up until it locks in
place.
To remove the clip, lift the bottom
of the clip and slide the clip off the
mounting spine.
Calibrating the
Touchscreen
The Dakota screen does not normally
require calibration. However, if the
buttons do not seem to be responding
properly, use the following process.
To calibrate the touchscreen:
1. While the unit is turned off, press
and hold for approximately 30
seconds.
2. Follow the instructions on the
screen until “Calibration is
complete” is displayed.
